Micromax q346 bd sw v004 gp phone firmware 100% working
micromax q346 dead boot repair firmware
micromax q346 bd sw v004 stock rom firmware
Device Brand : Micromax
Device Model : Q346
Device CPU : Q346
Device IntName : Q346
Device Version : 5.1
Device Compile : 4/19/2016 6:04:31 AM
Device Project : Micromax_Q346_BD_SW_V004_HW_V1.0_20160419
Device ExtInfo : Micromax Q346
how to flash spd cpu with research download
1 Download & Unpack File and extract Q346_Q346_5.1_Micromax_Q346_BD_SW_V004_HW_V1.0
2 Run Upgrade Download or Factory Download Tool
3 Click on “Load packet” and add the .pac
4 Click on “Start”
5 connect your android device to the computer
6 During the flashing your mobile will restart automatically
How to flash Pac Stock Rom on Android Smartphone
Remember: Your Android device should have atleast 40-50 percent of battery to perform the flashing process.
Step 1: Download and Install Spreadtrum USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: Download Stock Rom (pac) for your Android Device.
Step 3: Download SPD Upgrade Tool or SPD Research Tool and extract on your computer.
Step 4: Now, open UpgradeDownload.exe.
Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Android device to the computer (make sure your device is switch off).
Step 6: Once your Smartphone is connected successfully to the computer, click on the Load Packed Button and add the .pac file
Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Android Device using Spreadtrum Upgrade Tool. Once your Android Device is successfully restarted, Go to Settings > About Phone > Check firmware.